Install Pattern Imprinted Concrete

Pattern concrete may be sold under several names with some companies advertising the product as decorative, stamped or stencil pattern concrete. It is a modern alternative which gives a very realistic and stylish finish to those areas which might usually be paved or tiled. Characteristics and application vary a little depending on the precise product.

All types consist of a color hardener which is either an integral part of the concrete or is applied to an existing base. It creates a very smart finish to an area. For satisfactory results, care should be taken in the application. It is very durable with products withstanding use by light vehicles as well as pedestrians. Great improvement in the appearance of an area can be achieved by careful choice of color and design.

It is suited to a wide range of applications and is a modern alternative for pathways, pool surrounds and terraces. Other external areas which benefit are entrance ways, driveways and carports. Internally, it is eminently acceptable as flooring for kitchens, family rooms and patios. Sidewalks and entrances, shop floors and lobbies will also benefit from this classy finish.

While some products are used to resurface existing dull finishes, others are only applicable as part of a new surface. There is minimal maintenance once the product has hardened. A periodic clean and reseal is all that is required to keep it looking attractive. It is impervious to weather conditions and withstands normal pedestrian and light vehicle traffic.

There is a two-color option and a range of colors from natural browns and tans through to reds, blues and greens. By choosing terracotta with a brick-type pattern, a very natural effect is achieved. Stone and slate designs are also very realistic when used with complementary colors. Rock salt and slate is two of several textures offered and, in the right color, are again very natural-looking.

Traditional and classic patterns include well-known brick designs such as running bond, diamond tile, basket weave and herringbone. Others are convict brick, London cobble, cobblestone and bush-rock. Header patterns add an attractive finishing touch and rosette templates will draw attention to a particular area. Headers and rosettes should be chosen with the surrounding design in mind. Whatever the area you wish to enhanceFree Web Content, there will be a color and design to suit.

The material is applied after the stamping tool or template is put in place. It is then trowelled in and the stencil removed. The uncolored areas which have been covered with the stencil give the appearance of mortar joints. Later one or two coats of hardener are added. This helps preserve the color and increases the durability of the surface. The longer the hardener can be left to cure the better. Between one and seven days is usually recommended for pedestrian use and longer for areas which will be subjected to vehicular traffic.

If you want to apply this product yourself accurate placement is vital. Otherwise consistency and uniformity may be compromised. Installers and contractors are trained to ensure a high quality finish. Installing pattern concrete will give a very impressive finish to a previously unremarkable area.